Have you bought a projector recently but couldn’t use it yet because you don’t know how to mount it? Well, guess what! I am here to help you with this.
The projector is an essential medium that can help you put an image or a video on a large screen. People from all over the world use this daily, especially in the office or the educational institution.
In a word, it has become part and parcel of their everyday life now.
In this article, I will be guiding you on how to mount a projector to the ceiling. All you need to do is follow the whole setup process carefully and put it on the roof in no time.
How To Mount A Projector To The Ceiling Step by Step
Screen Position
To begin with, you need to decide first where you want to put the projector and the projector screen. All in all, it is best to put the projector is near a wall. Therefore, you can make the wires as discrete as possible.
Furthermore, if there is a window, you can take a decorative trunk and put it on the window frame to make those wires more discrete.
However, if there is no option to use a window frame, you can run along with the coving or skirting board as well.
Projector Position
The next step is to calculate the exact position on the ceiling to mount the projector. First, measure the distance between the wall and the screen’s edge. In addition, measure half the width of the screen.
Now, go to the other end of the same wall and put the exact measurement on the ceiling where you want to put the projector to go.
Moreover, it would be best to ensure enough throw distance between the projector and screen. Finally, it is crucial to mark a substantial part on the ceiling by tapping around using your knuckles.
Projector Setup
Next, take the projector, flip it to the down side, and carefully attach the mounting bracket by following the manual. It is essential to make the bracket in line with lens.
When you are happy with the position, fasten the bracket to the down securely. After that, use a drill, make an initial hole on the ceiling, and use enough screws to mount the bracket steady.
Finally, take the projector and put it on the bracket carefully, and check if you are happy with the position.
Wire up The Projector
If you plan to use a separate sound source, you will only need an HDMI and power cable then. In addition, you can use a power cable extension if necessary. Now, wire up your projector and place it back on the bracket.
Lastly, measure how much wire you need and take the decorative trunk according to the measurement. Now remove the sticker from the back to reveal the sticky side and carefully place it into a position where you need to hide the wire position and gently push it.
This time remove the power connection and open up the trunk to put the wires inside. Lastly, give everything a cross-check and if you are happy with every connection, wait for the sun to go down and enjoy your favorite movies on the massive screen.
How to Do Maintenance of a Projector
It is pretty necessary to do maintenance of your projector regularly. It does not need to be done every day or every week but should be done once a month.
Taking care of the projector will increase its lifespan and work to its highest capability. So, here is the guidance on how to take good care of your projector.
Outer Surface
Since your projector is always hanging on the ceiling, it will easily collect dust and get dirty. To clean the projector’s outer surface, take a clean microfiber cloth and wipe down the outside gently.
In addition, it is recommended to use a compressed air bottle and spray the air around. Thus, it will remove dirt from every tiny corner.
Air Filter
To clean the air filter, you need to locate the filter first and open the cover. Then pull out the filter by holding the filter handle.
Simply tapping gently on the table or with a compressed air bottle, you can remove the dust. Therefore, it is spotless now and can cool down the projector in no time.
Wipe Lens
To begin with, you have to be more careful while cleaning the lens because it is incredibly fragile. If there is a shutter door for the lens chamber open, carefully wipe down all the dust accumulated there.
You don’t want to put pressure on the lens but wipe it gently. Lastly, close the shutter immediately.
Lamp Cavity
Last but not least, you need to clean the lamp cavity, which may be the most challenging task for you. This task is not that hard; all you have to do is clear those accumulated dust inside the lamp cavity.
It is essential to clan dust from there; otherwise, you will get a burning smell from the lamp over time. As more dust enters there from time to time, the heat from the bulb starts to burn the dirt.
Now take a screwdriver, open the lamp door and remove the lamp. Once you remove it, you can use compressed air to clean the inside chamber and wipe the dirt with the microfiber cloth. Finally, after making sure all the dust has been removed, you can put back the lamp.
Final Words
To sum up, it is a pretty easy task to mount your projector on the ceiling. All you must do is follow those guidance serially, and you will not face any problem.
This article was all about the steps on how to mount a projector to the ceiling. In the beginning, I have tried to tell you every individual step for hanging the projector on the top. Lastly, I guided you on how you can maintain your projector.
Thank you so much for your time and consideration in visiting here. I hope your problem has been solved by now.
